Screen Displaying No Signal

Hello,

If your screen is displaying "No Signal", please follow the below:

1. Confirm all cables are connected securely to the screen.
2. Check that receivers (if applicable) have two lights showing. One green and one Yellow.
3. Check the input is correct on the screen, you can do this via the buttons on the screen or with the screen remote.

If you are still receiving a "No Signal" error after following the above please try the steps below, this may require assistance of local IT:

1. Confirm all cables are connected securely to the PC and that the PC is on.
2. Check that the transmitter is showing both sets of lights as per the receiver.

Should you still have a "No Signal" error displaying, please contact Local IT first (unless already involved). 

If issue is still un-resolved contact BeaverGroup here or via the live chat option at the bottom right.